Furnace Repair in Troy, MI
24/7 Furnace Repair
Fast, Honest Furnace Repair, Day or Night
If your furnace stopped heating, is blowing cold air, or is making a noise it didn't make last week, call us at 248.909.7228. All Heating & Cooling has been fixing furnaces in Troy for more than 40 years, and we answer 24/7. A Michigan winter night isn't something you should have to wait out.

Request A SERVICE
Service
Signs Your Furnace Needs Repair
- The furnace runs but the air coming out is cold or lukewarm
- It turns on and off every few minutes (short cycling)
- Banging, squealing, grinding or rattling from the unit
- Some rooms are warm and others stay cold
- Your gas bill jumped and your usage didn't change
- The burner flame is yellow instead of blue
- The furnace won't start at all
Check These First
Some no-heat calls turn out to be simple. Before you call, it's worth checking:
- The thermostat is set to Heat and a few degrees above room temperature. Replace the batteries if it has them.
- The air filter isn't clogged. A dirty filter can make the furnace overheat and shut itself off.
- The furnace switch, which looks like a light switch on or near the unit, is on.
- The breaker for the furnace hasn't tripped.
If none of that fixes it, call us.
Smell gas or hear your CO alarm?
Don't troubleshoot. Leave the house, then call your gas utility or 911 from outside. Call us once it's safe.
Common Furnace Problems We Fix
Most no-heat calls come down to a handful of parts. Our technicians repair all of them on gas furnaces of every age.
Ignition & flame sensor
A dirty flame sensor or a failed hot surface ignitor is one of the most common reasons a furnace starts, then shuts right back off.
Blower motor & capacitor
If the burners light but no air moves through the vents, the blower motor or its capacitor is a likely culprit.
Inducer motor & pressure switch
These make sure exhaust is venting safely before the burners fire. When one fails, the furnace won't start.
Limit switch & overheating
Restricted airflow can trip the high-limit switch. We find out why and fix the cause, not just the switch.
Thermostat & wiring
Sometimes the furnace is fine and the problem is the thermostat, the wiring or the control board.
Condensate drains
High-efficiency furnaces drain water. A clogged line or a failed condensate pump can shut the system down.
How a Furnace Repair Visit Works
1
You call
Tell us what's happening. Day or night, we'll set a time.
2
We diagnose
The technician tracks down the actual cause instead of guessing.
3
We explain & quote
You hear what's wrong and what the fix costs before any work starts. No surprises on the bill.
4
We fix & test
We run the furnace through a full heating cycle to make sure it's working before we leave.
Repair or Replace?
Most furnace problems are worth repairing. Replacement starts to make sense when the furnace is older, needs repairs every season, or a single repair costs a large share of a new unit.
If we think you're at that point, we'll tell you plainly and let you decide. Learn more about furnace installation and replacement.
Prevent the Next Breakdown
A yearly tune-up won't stop every breakdown, but it catches worn parts, dirty sensors and airflow problems before they leave you without heat.
Book a furnace tune-up in early fall, before the first cold snap.
Why Troy Homeowners Call All Heating & Cooling
40+ years in Troy
We're a local shop at 103 Cherry Ave, not a call center.
24/7 emergency service
Furnaces don't wait for business hours, so neither do we.
Upfront pricing
You approve the price before we start any repair.
Repeat customers
Much of our work comes from people we've helped before and their referrals.
Heating and cooling
The same team handles your furnace and your air conditioner.
Honest recommendations
If a repair makes sense, we repair it. We don't push replacements.
Furnace Repair Service Areas
We work out of our shop at 103 Cherry Ave in Troy and serve homeowners throughout Troy and nearby Oakland and Macomb County communities, including:
- Troy
- Rochester Hills
- Sterling Heights
- Birmingham
- Bloomfield Hills
- Clawson
- Royal Oak
- Madison Heights
Don't see your city? Call 248.909.7228 and ask.
Furnace Repair FAQs
Do you offer emergency furnace repair?
Yes. We provide 24/7 emergency service. Call 248.909.7228.
Why is my furnace blowing cold air?
Common causes include a thermostat fan set to On instead of Auto, a clogged filter that's tripping a safety switch, or an ignition problem. Check the thermostat and filter first. If it's still blowing cold, call us.
How much does furnace repair cost?
It depends on the part and the labor involved. Cleaning a flame sensor is a small job, while a blower motor or control board costs more. We diagnose the problem first and give you the price before any work starts.
How often should I change my furnace filter?
It depends on the filter. Many 1-inch filters need changing every 1 to 3 months, while thicker media filters last longer. Check the filter's packaging and replace it sooner if it looks dirty.
Can regular maintenance prevent furnace breakdowns?
It won't prevent every breakdown, but a yearly tune-up catches many problems before they leave you without heat.
Related Services
Furnace MaintenanceYearly tune-ups that catch problems before winter does.Learn more ›Furnace InstallationRight-sized furnace replacements and new construction installs.Learn more ›AC RepairAC not cooling? 24/7 repair, plus $50 off.Learn more ›
See everything we do on our services page, or learn more about All Heating & Cooling.
No Heat? We're Available 24/7.
Call now or request service and we'll get your home warm again.
248.909.7228